6 indicators concrete crack injection is needed, House Shift Help, Home Movement
6 Indicators Concrete Crack Injection is Needed
6 May 2021
When the ground below your house starts to shift, you may be in need of concrete crack injection. This is a process where fluid is injected into cracks in the concrete to stabilize it and stop leaking water or gas into your home. You can do this by yourself or hire an expert to handle the job for you. No matter what type of building project you are working on, there will likely come a time when you need some form of concrete repair. In this blog post, we’ll cover 6 indicators that concrete crack injection is needed!
What is Concrete Crack Injection?
Crack injection is a process that involves injecting fluid into cracks in concrete to stabilise them and stop leaking water or gas. This can be done by the homeowner, but it’s usually better if an expert handles the project for you. There are many reasons to hire an expert, one of them being that the crack injection professional can locate and fix any trouble areas in advance before injecting concrete.
Does Crack Injection / Crack Repair Actually Work?
Yes! Crack injection is a cost-effective and time-saving way to keep your home or business from suffering due to leaks. It’s important that concrete cracks are repaired before they turn into larger problems, such as holes in the floor. If you do not repair the concrete cracks, they can eventually cause water or gas to leak into the floor. Look at hiring a crack repair specialist company to come for an inspection.
What Causes Cracks in Concrete?
The three main factors in concrete cracks are settling, improper installation, and heavy equipment. As your home ages, gravity takes its toll on the building materials that make up your foundation including dirt, gravel and sand.
Over time you may notice hairline cracks in your basement walls or sidewalks – some areas more susceptible than others due to their weight-bearing requirements.
The longer a crack exists without an epoxy injection treatment, the wider it becomes until it finally ruptures completely causing leaks from pipes below ground level down through the wall spaces inside of a structure leading to costly repairs for the structural integrity and possible replacements for expensive fixtures like dishwashers or washing machines.
6 Indicators That You Need Concrete Crack Injection
1. Your Concrete is Cracked
We can usually identify a crack in concrete by looking for discolouration. If you see any on your foundation, it’s important to have an inspection done and if the cracks are deemed deep enough, we’ll recommend that they be injected with epoxy.
If you’re unsure about what some of these indicators mean or how deep the cracks may go, crack repair technicians will do their best to make sense of all this information so that together we can develop a plan to address your specific repairs needed.
The sooner you know about one of those pesky little problems, like cracked concrete, the better off everything is going to be!
2. Concrete Has Sunk or Settled Unevenly
When the concrete has sunk unevenly it’s going to cause a lot of headaches for the homeowners. The most common reason for this is that there was too much water used or not enough cement when pouring the concrete in place.
This uneven settling can be identified by looking at how far the cracks are below ground level because once they get too deep, you’ll have trouble fixing them without first having someone come out and inject epoxy into those areas where we found significant amounts of settlement.
If your foundation has sunk more than an inch, call a crack injection or crack repair technician as they might need to pull up some of these pieces so that the cracked concrete can be injected with epoxy as well!
3. Concrete Surface is Spalling, Which Means the Concrete Has Begun to Break Apart in Places.
This is often caused by moisture seeping into the concrete that’s been under pressure, so it can either be due to improper drainage or because of water infiltration from a crack in the foundation.
The most common reason for this is that there was too much water used or not enough cement when pouring the concrete in place.
It will take an epoxy injection and an experienced contractor with crack repair expertise working on spalling concrete to fix this problem!
4. There are Tree Roots Growing Under the Slab of Concrete
When you see roots, it usually means the concrete has been under pressure for some time and water infiltration from cracks is occurring.
This can be fixed by epoxy injection to fill in any cracks that are causing an issue!
The best way to know if you need your cracked concrete repaired is by having a crack repair professional come out and inspect it for you so they can determine what’s going on with your structural integrity and slab of concrete!
If these warning signs sound like something you’re dealing with, get a structural crack repair specialist to come out, or even a company that specialises in crack injection repairing in Australia.
5. Water Seeps Through Cracks in the Foundation or Walls of a Building
If you see water seeping through cracks in your foundation or walls, it’s usually time for some concrete crack repair.
This is a sign that the slab of concrete has been under pressure and water infiltration from cracks is occurring!
We recommend an epoxy injection to fill in any cracks and seal them up so this problem can be resolved!
The best way to know if you need a concrete crack repair done at your home or business is by contacting a crack injection specialist company in Australia that deals in concrete crack injection and waterproofing services.
Some of these companies also deal in post-tension and other suitable concrete crack services that your structure may need.
6. A Crack Appears on an Interior Wall That Doesn’t Have Any Windows or Doors Opening into it
If you find a crack on one of the walls that don’t have any doors or windows opening into it, this usually means there is an issue with the column.
The water from these two locations leak onto each other and causes structural problems such as corrosion and rusting in pipes followed by concrete spalling.
When a foundation or building is cracked, water seeps through the cracks and damages other parts of the structure. The person who fixes these types of problems is called crack injection specialists. They can inject epoxy-based materials into concrete to seal up any gaps that allow moisture in.
If you have noticed any signs of cracking on your property or within your home, contact one today. Crack injection specialists are licensed contractors that will come out with their equipment to assess where needs attention most urgently so they can get started fixing it right away!
Comments on the 6 indicators concrete crack injection is needed help are welcome
Building Tours Selection
British Architectural Walking Tours
Danish Architecture Walking Tours
Dutch Architectural Walking Tours
Comments / photos for our 6 indicators concrete crack injection advice article welcome